Dry Cleaning And Washing Cylinder - Qinsun
Fabricant professionnel d'instruments de détection
Ligne directrice nationale de consultation :+86 021-64208466

Dry Cleaning And Washing Cylinder

Dry Cleaning And Washing CylinderTesting Standards:AATCC 162, 16 CFR Part 1610Applications:Dry Clean

Courriel : info@standard-groups.com

Contenu
Dry Cleaning And Washing Cylinder

Testing Standards:
AATCC 162, 16 CFR Part 1610

Applications:
Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water. It also can be used to prepare samples for flammability testing.

Product Information:
Dry cleaning and washing cylinders are also known as dry cleaning tester and AATCC 162 tester. Dry cleaning and washing cylinder is used to test the color fastness of fabric to dry-cleaning and chlorine water washing. The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support frame, variable speed drive with digital timer.

Parameters:
1.Equipped with stainless steel rotating roller;
2.Height of tank: 330mm;
3.Diameter of in-tank: 220mm;
4.Rotating speed can be adjusted according to customer's requirements;
5.Overall dimension: 720×490×620mm(L×W×H);
6.Equipped with digital timer and displays;
7.Weight: 98kg.

Operation
Clean the dry cleaning cylinder
Prepare the hardness concentrates according to the relevant standards.
51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized    water.
If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
Get out the sample and remove the excess solution.
 

Paramètres techniques
ProjetsParamètres
Dimension72L X 49W X 62H (cm)
StructureStainless steel
Surface treatmentWiredrawing treatment
Transport weight80kg
Power supply220V  50HZ  max.0.05A
 

Notes
1. For dry cleaning test, the instrument should be placed in the fume hood (using toxic solvent of tetrachloroethylene).
2. The operators need to wear gas masks and protective gloves.
3. Carefully handling with the liquid recycling, sending to the waste liquid recycling station for suggestion.

Product Display
 
 

Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.

Précédent :Gas Fume Chamber
Page suivante:Scorch Sublimation Tester

Message en ligne

Détails de contact

Téléphone de l'entreprise

+86-21-6420 0566

Heures de travail

Du lundi au vendredi

Téléphone portable:

13816217984

Courriel :

info@qinsun-lab.com

Code QR