DescriptionThe TE 54 Mini Traction Machine has two motors, one to provide the input power and o
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
The TE 54 Mini Traction Machine has two motors, one to provide the input power and one to absorb the transmitted power. The design is of the “over-hung” roller type, with test rollers fitted over-hung on the end of the machine test spindles. Loading is via servo controlled pneumatic bellows, with force transducer feedback.
| Ball Specimen Diameter: | 25 mm |
| Upper Disc Specimen Diameter: | 25 mm |
| Upper Disc Specimen Width: | 8 mm |
| Lower Disc Specimen Diameter: | 50 mm |
| Maximum Ball Speed: | 4.000 rpm |
| Maximum Ring Speed: | 2.000 rpm |
| Maximum Surface Speed: | 5.24 m/s |
| Maximum Load: | 500 N |
| Maximum Hertz Pressure (steel): | 2.0 GPa |
| Oil Bath Temperature: | ambient to 150°C |
| Heater Power: | 250 W |
| Temperature Sensor: | k-type thermocouple |
| Loading System: | Pneumatic bellows with force feedback |
| AC Vector Drive: | Two 0.75 kW closed loop with common DC link |
| Motors: | Continuous: 0.75 kW @ 50 Hz @ 1.450 rpm |
| Feedback: | 2.048 ppr encoder |
| Drive Ratios: | |
| Motor:Ball: | 1:1 |
| Motor:Ring: | 2:1 |
| Interface: | Serial Link Interface Module |
| Software: | COMPEND 2000 |
| Controlled Parameters | Motor speed |
| Motor speed difference | |
| Applied load | |
| Test bath temperature | |
| Measured Parameters: | Motor speed |
| Motor speed difference | |
| Applied load | |
| Traction force | |
| Test bath temperature | |
| Derived Parameters | Entrainment Velocity |
| Sliding Velocity | |
| Slide/Roll Ratio | |
| Traction Coefficient | |
| Services | |
| Electricity: | 380/415 V, three phase, 50/60 Hz, 1.5 kW, with neutral & earth |
| 220/240 V, three phase, 50/60 Hz, 1.5 kW, with neutral & earth | |
| Clean, dry air: | 4 cfm at 8 bar (120 psi) |
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
